Set up the Forebody Aeros Table Used in Contraj 7DOF

The final step to preparing the aerodynamics for our round to run Contraj 7DOF is to set up the Forebody Aeros Table. This table supplies the forebody aerodynamics. Note this table is not used in Contraj. The table provides the information so Contraj 7DOF can model the trajectory including the effects of the despun nose.

Contraj uses the Fin Aero Table to build up the total aero table for the trajectory. In the case of the 7 DOF variant of CONTRAJ the "Forebody Aeros" Table is also used.

We will next set up the Forebody Aeros Table. The table can be found on the "Forebody Aeros" tab in the "Aero Direct Input" interface as shown below. Note at this point in our example, all of the values are zero as shown below.