Setting up the Example Contraj7DOF Round

The first step will be to prepare the round for Contraj 7DOF. This step is quite involved. Preparing the round includes modeling the forward depun nose and calculating all of the aeros. We will use the round to exercise the Contraj 7DOF capability. At the end of the tutorial, we will use this round to run Contraj 7DOF multiple times using a PRODAS macro. It will run 3 deployment times full circle thus producing the theoretical maneuver footprint.

The steps to set up the round for our Contraj 7DOF example will involve

Pulling the spinner projectile from our #105M1Cartridge.pr3 inventory round
Setting up the Gun
Running Aero prediction and Stability on the spinner round and saving the aeros
Adding the forward canards to the round and calculating the finner aeros
Pasting the spinner aeros back into the basic aeros table
Running Contraj to verify the aeros and paste the basic aeros from the formatted output
Build the Forebody Aeros table which is needed for Contraj 7DOF